• 沸点： 225℃

• 外观： 液体

• 储存条件： RT

• 注意：部分产品我司仅能提供部分信息，我司不保证所提供信息的权威性，仅供客户参考交流研究之用。

• 18. [IF=8.4] Ying Li et al."Nitrogen-doped carbon dot and DNA tetrahedron nanostructure based electrochemiluminescence aptasensor for AFB1 detection."SENSORS AND ACTUATORS B-CHEMICAL.2024 Feb;401:135024

• 17. [IF=7.4] Fan Yang et al."Electrochemiluminescent CdS Quantum Dots Biosensor for Cancer Mutation Detection at Different Positions on Linear DNA Analytes."ANALYTICAL CHEMISTRY.10.1021/acs.analchem.3c02649

• 16. [6.652] Simeng Zheng et al."An ultrasensitive and specific ratiometric electrochemical biosensor based on SRCA-CRISPR/Cas12a system for detection of Salmonella in food."FOOD CONTROL.2023 Apr;146:109528

• 15. [IF=4.478] Wang Long et al."FeMOF-based nanostructured platforms for T-2 toxin detection in beer by a “fence-type” aptasensing principle."ANALYTICAL AND BIOANALYTICAL CHEMISTRY.2022 Sep;:1-10

• 14. [IF=5.833] He Baoshan et al."An amperometric zearalenone aptasensor based on signal amplification by using a composite prepared from porous platinum nanotubes, gold nanoparticles and thionine-labelled graphene oxide."Microchim Acta. 2019 Jun;186(6):1-10

• 13. [IF=7.46] Baoshan He et al."A “signal-on” voltammetric aptasensor fabricated by hcPt@AuNFs/PEI-rGO and Fe3O4NRs/rGO for the detection of zearalenone."Sensor Actuat B-Chem. 2019 Jul;290:477

• 12. [IF=7.991] Ming Lu et al."A polyethyleneimine reduced graphene oxide/gold nanocubes based electrochemical aptasensor for chloramphenicol detection using single-stranded DNA-binding protein."Mater Design. 2021 Feb;199:109409

• 11. [IF=13.273] Baoshan He et al."Nb.BbvCI powered DNA walking machine-based Zr-MOFs-labeled electrochemical aptasensor using Pt@AuNRs/Fe-MOFs/PEI-rGO as electrode modification material for patulin detection."Chem Eng J. 2021 Feb;405:126642

• 10. [IF=2.896] Bao-Shan He et al."Electrochemical aptasensor based on aptamer-complimentary strand conjugate and thionine for sensitive detection of tetracycline with multi-walled carbon nanotubes and gold nanoparticles amplification."Anal Methods-Uk. 2018 Feb;10(7):783

• 9. [IF=4.142] He Baoshan et al."Novel electrochemical aptasensor for ultrasensitive detection of sulfadimidine based on covalently linked multi-walled carbon nanotubes and in situ synthesized gold nanoparticle composites."Anal Bioanal Chem. 2018 May;410(12):2901-2910

• 8. [IF=5.833] He Baoshan et al."Voltammetric kanamycin aptasensor based on the use of thionine incorporated into Au@Pt core-shell nanoparticles."Microchim Acta. 2019 Feb;186(2):1-8

• 7. [IF=5.833] He Baoshan et al."Aptamer based voltammetric patulin assay based on the use of ZnO nanorods."Microchim Acta. 2018 Oct;185(10):1-8

• 6. Baoshan He, Xiaoze Dong, Nb.BbvCI powered DNA walking machine-based Zr-MOFs-labeled electrochemical aptasensor using Pt@AuNRs/Fe-MOFs/PEI-rGO as electrode modification material for patulin detection, Chemical Engineering Journal, Volume 405, 2021, 126642,

• 5. He, B., Yan, X. An amperometric zearalenone aptasensor based on signal amplification by using a composite prepared from porous platinum nanotubes, gold nanoparticles and thionine-labelled graphene oxide. Microchim Acta 186, 383 (2019). https://doi.org/10.1

• 4. He, B., Yan, X. An amperometric zearalenone aptasensor based on signal amplification by using a composite prepared from porous platinum nanotubes, gold nanoparticles and thionine-labelled graphene oxide. Microchim Acta 186, 383 (2019). https://doi.org/10.1

• 3. Baoshan He, Xiaohai Yan, A “signal-on” voltammetric aptasensor fabricated by hcPt@AuNFs/PEI-rGO and Fe3O4NRs/rGO for the detection of zearalenone, Sensors and Actuators B: Chemical, Volume 290, 2019, Pages 477-483, ISSN 0925-4005, https://doi.org/10.1016/j

• 2. He, Baoshan, and Xiaoze Dong. "Aptamer based voltammetric patulin assay based on the use of ZnO nanorods." Microchimica Acta 185.10 (2018): 1-8.https://doi.org/10.1007/s00604-018-3006-0

• 1. 闫好杰, 卫敏, 郭凯丽. 基于新型核酸适配体传感器的赭曲霉毒素A检测研究[J]. 河南工业大学学报(自然科学版), 2018, 39(01):99-103+138.

输入产品批号：

本计算器可帮助您计算出特定溶液中溶质的质量、溶液浓度和体积之间的关系，公式为：

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子量 (g/mol)

• pg ng μg mg g kg =
  fM pM nM μM mM M *
  nL μL mL L *